RIGEL ELECTRICAL SAFETY ANALYZER 288+

SPECIFICATION: 

Earth Continuity

Method 2 wire technique, using ‘zero’ lead function. 

Test Current >+200mA, -200mA DC into 2 ohms 

Max Test Voltage 4-24V rms o/c (6V for IEC 60601 tests) 

Measuring Range (low range) 0.001 – 0.999 ohms @ 0.001 ohms resolution 

Measuring Range (mid range) 1.00 – 9.99 ohms /@ 0.01 ohms resolution 

Measuring Range (high range) 10.0 – 19.9 ohms @ 0.1 ohms resolution 

Accuracy ± 3% of reading + 10 m ohms 

 

Insulation Resistance

Measurement EUT to Earth / Ground, EUT to AP, AP to Ground 

Voltage 250V DC, 500 V DC @1mA. 

Range (low range) 0.01Mohms – 20 Mohms 

Accuracy (low range) ± 5% of reading +2 counts 

Range (high range) 20Mohms – 100Mohms 

Accuracy (high range) ±10% +2 counts 

Resolution 0.01Mohms 

 

Direct Leakage Measurement

Measuring Range 4µA to 9999µA 

Accuracy ± 5% or reading +2 counts 

Mains on A.P. voltage F-type only @ 110% of mains 

Measuring Device As per IEC 60601-1 requirements 

Measurement Type Separate AC & DC for Patient (-Auxiliary) True RMS for all remaining 

Leakage tests Leakage to IEC 60601 

 

Differential Leakage Measurement

Measuring Range 75µA to 9999µA 

Accuracy ±5% of reading + 5 counts 

Measurement / display resolu 1µA 

Measurement Type True RMS 

Measuring Device Similar frequency response characteristics to IEC 60601-1. 

 

Alternative Leakage Measure 

Test Voltage 250V at mains frequency 

Test Current 3.5 mA current limited 

Measurement Range 4µA to 9999µA 

Measurement Resolution 1µA 

Measurement Accuracy ±5% of reading + 2 counts 

Measurement Type True RMS 

Measuring Device As per IEC 60601-1 

 

Power Measurement

Method VA rating. 

Range 0.1KVA – 4KVA 

Accuracy ±10% + 2 counts 

 

Mains Outlet Test

Input voltage range 0-300V AC, max current 16A 

Measures L – E, N – E & L – N 

Accuracy ± 5% of reading + 2 counts 

 

IEC Mains Lead Test

Test Duration 2s 

Test: Continuity of all conductors, Earth bond, Insulation & Polarity 

 

General

Mains power 230 VAC ±10%, 50Hz +/- 1Hz 120 VAC ±10%, 60Hz +/- 1Hz (USA model) 

Battery 6 x 1.5V Alkaline AA 

Weights 1.6 kg including batteries 

Size (L x W x D) 270 x 110 x 75 mm / 10.5 x 4 x 3” 

Operating conditions 0′ – 40’C, 0-90% RH – NC 

Storage environment -15′ – +60’C 

Environmental Protection IP 40 

Calibration Certificate 

Uncertainty Certificate 

 

Included standard accessories : 

Carrying Case

Earth bond test probe with clip

Earth bond clip lead

Patient Applied part module

10 applied part adaptors

Detachable 2 meter mains cable 

Bluetooth USB dongle General 

Application Software